FPP Colorlight config

[Wayne Laagewaard]

Hi,

I have pi 3 b+
Colorlight 5A 75B
FPP

I configered Ledvision and FPP Led, but when i plugin the Pi i press test pattern nothing happens...

I also tried it with a external gibit ethernet to USB

But nothing. Do i miss something

Thanks in advance

Wayne
-Holland

[k6ccc]

Until you have LEDVision working correctly, don't even both trying to make the panel work with FPP.  Gotta have LEDVision working perfectly first.

[Wayne Laagewaard]

Well i have this configured

https://diversit123-my.sharepoint.com/:i:/g/personal/wayne_laagewaard_dynamicsguru_nl/EQLIMMeyw0dJgrteHzHW3QkBwP_GZanj1pEVVDYE4DYNrQ?e=Sb5sSO

so i still dont know what i am doing wrong

[Poporacer]

I also tried it with a external gibit ethernet to USB

You do not need the Ethernet adapter with a 3B+
Also, unless you are an advanced user, there is usually no need to go into the shell. Everything you need is available from the GUI interface.

I configered Ledvision and FPP Led

How about a screenshot of your FPP LED settings page?

Do i miss something

Also include how you have everything connected.

[Wayne Laagewaard]

Hi Tnx here you are

https://diversit123-my.sharepoint.com/:w:/g/personal/wayne_laagewaard_dynamicsguru_nl/ETD2MnH-YUVKlhwtghl-kLUB8e3UcfdMngTjoyxnCKpGgg?e=xJMBgk

I used the config files wich were deliverd by Lyson LED

and when i start test pattern there is some activitty 

https://diversit123-my.sharepoint.com/:v:/g/personal/wayne_laagewaard_dynamicsguru_nl/EWOM80mtxehKkRO0Bs_HqBUBapUHI5RFj_zd4RWfMcDyPg?e=SSGQLW

[Poporacer]

Hi Tnx here you are

In the future, post the pictures here....You will use the Reply button to get to the attachments, or you could preview a Quick Reply to get them...That way the picture is part or your post and makes it easier for us to help.

Simplify things. Disconnect the Ethernet adapter and then give us some updated screenshots.

You have to exit LED vision in order for the FPP to send the data.

[Wayne Laagewaard]

Ok,

I tried that before but uploading images didnt work. I will gove you an update

Tnx

Wayne


Verzonden vanaf mijn iPhone met Tapatalk

[Wayne Laagewaard]

Ok this is what I notice,

When i press the pattern test the lights on the color light are blinking

https://youtube.com/shorts/3wnkIyWKlwI?si=jsY_3Q3ELQVdr6Xk

What i also notice is that Panelsrus use 8.0 panels and this js a 8.2 panel

So in parallel ill ask colorlight support if that could be a problem


Verzonden vanaf mijn iPhone met Tapatalk

[Wayne Laagewaard]

Poporacer,

Thanks for the help but I found the solution. With the info that i had an 8.2 card, I kept searching and saw a downgrade tool used by panelrus gor flickering. So i downloaded and downgraded the card to firmware version 11.19 instead of 11.39 and the testing worked. Now the next steps...

Thank for beeing a soundboard

Wayne....


Verzonden vanaf mijn iPhone met Tapatalk

[Wayne Laagewaard]

Still i have one more question, when i screentest in LEdvision or FPP the receiver crashes... any one else experienced this?

[Wayne Laagewaard]

And again it was my fault. Power issue... tnx all


Verzonden vanaf mijn iPhone met Tapatalk