Falcon Christmas

Falcon Player (FPP) => Falcon Player (FPP) => Topic started by: JohnD on July 31, 2022, 09:17:39 PM

Title: Test button doesn't work on a kulp K16A-B board
Post by: JohnD on July 31, 2022, 09:17:39 PM
Trying to test out a brand new Kulp K16A-B board.  Loaded FPP v6.0 on a new card and configured it.  Under "Channel outputs" I clicked the enabled K16A-B  saved and restarted FPP.  If I click on the "Test Pattern" button the browser the string of pixels cycles through the colors.  If I try to do the same thing via the Test button or the Menu off the controller the pixels never light.  Just to make sure I didn't have a bad board, I flashed FPP v5.5 to another new card and the button and the test menu options on the board work as explected.  Did I miss something that is preconfigured in V5.5 and not v6?
Title: Re: Test button doesn't work on a kulp K16A-B board
Post by: GetJBoards on July 31, 2022, 09:46:42 PM
What does your GPIO page look like?
Title: Re: Test button doesn't work on a kulp K16A-B board
Post by: JohnD on August 02, 2022, 04:51:00 PM
I went through and compared the GPIO and the output channels and they are both Identical. On the GPIO page nothing is enabled, PULL UP/DOWN set to None and all commands are blank. As for the Output Channels everything is default to 50 pixels and the test pattern on that page works in V6.
Powered by SMFPacks Menu Editor Mod