Need Expert Advise on F16v4 Ports vs Universe Configuration

[Kairus]

Hello All;

I am planning to build an LED wall which will fit 196 pixel strings which will make 5-meter wide.  The length (height) of each string is different from each other.  This would mean that the number of pixels of each string horizontally is different from the others (see Figure 1).  Now, if I would need to have 196 strings, does this mean I need to assign each string to each F15v4 port?  If that would be the case I might be needing at least four (4) F16v4 with two (2) expansion cards (equivalent to 48 ports) each to give me 192 ports (4 x 48 ports)?  Can I maximize each port in such a way I can combine shorter pixel strings into one (1) F16v4 port?  I haven't had any idea if these configurations I have in mind would make sense. See Figures 2 and 3 for reference.  I would really appreciate it so much if there would be some one who can give light on this.

[Poporacer]

Posting in more than one topic won't get you help any faster. Answer already provided.

[Kairus]

my apologies... i err, therefore i am...