News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15660
Latest: PaulDzRGB
New This Month: 10
New This Week: 3
New Today: 0
Stats
Total Posts: 128435
Total Topics: 15791
Most Online Today: 32
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 3
Guests: 25
Total: 28

Config

Started by CEALEYSM, January 05, 2022, 07:56:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

CEALEYSM

I am running a Raspberry Pi4  with falcon v5 software I am having trouble configing my Sandevice E682 controller. Pi4 ETH0 is 10.0.1.100 Sandevice controller ip is 192.168.1.206. How do i config the controller to be seen by the Pi4?

k6ccc

#1
Those two devices are not on the same IP subnet.  Change the E682 to an address on the 10.0.1.x subnet or change the Pi to some address on the 192.168.1.x subnet.
On the SanDevices controllers, you must specify Unicast vs multicast, so make sure that matches the format used by the Pi.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

jnealand

How did the Pi4 get that address?  If that is an address on you home network I would change it to the 192.168.1.x network.  The wifi of the Pi4 should be configured to be on your home network and that is how you should access it unless you are going to run all connections thru a switch.  What else will be on your show network config?
Jim Nealand
Kennesaw, GA all Falcon controllers, all 12v Master Remote Multisync with Pi and BBB P10 and P5

Support FPP

+- Recent Topics

F16V3 with 2 expansion boards at 40 fps MAX PIXELS per output? by Bwinter
February 08, 2023, 07:21:51 PM

Warning/Error: Network incomplete frames hit 250. by JonD
February 07, 2023, 10:59:15 AM

F48V4-NS at 40 fps using all 48 pixel output ports? by Poporacer
February 06, 2023, 10:27:09 AM

Unable to update RPi 5.5 to latest version by JonB256
February 05, 2023, 07:23:16 PM

help getting started, next step? by rayster
February 05, 2023, 04:24:09 PM

F48v4NS - Pi or No Pi? by joeyblasko
February 05, 2023, 09:15:33 AM

Huidu Controllers LED matrix by CaptainMurdoch
February 04, 2023, 10:18:47 AM

FPP6.2 universes by darylc
February 03, 2023, 08:48:57 PM

F16v4 Ports vs Universe Configuration Question by k6ccc
February 03, 2023, 09:32:48 AM

Need Expert Advise on F16v4 Ports vs Universe Configuration by Kairus
February 03, 2023, 09:32:33 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod