F16v2 v1.03 and FPP networking snafu

[Bassun]

Hey guys -- so I'm not sure what happened - but, the FPP was not sending the data to the F16 when I set up over Thanksgiving.  I've broken it real good since then, but got it almost back to working.  I can control the F16 through the FPP (ie - wireless connection to FPP and able to turn test mode on, make changes, etc to the F16).  But I am still not getting any packets from the FPP when it is trying to run a show.

I know it is probably something simple, but I'm over looking it and just cannot seem to figure out the issue.  No changes in software since last year.
Here are the current versions - I don't want to change them since I know they worked fine.  Can you guys take a look and see what I've got set up wrong to keep the show from broadcasting and/or being received by the F16? Again, the network connection works, I can pull the data and turn on test mode just fine wirelessly, so I know it is running "through" the FPP.  It just will not ever see show data.  My packet count always stays at 0, so it isn't a light issue.  I've tried multiple sequences both single fseq files and show play lists.  Nothing from any.

Thanks y'all in advance.  I just cannot seem to figure out what I'm doing wrong.

Rasberry Pi 3 B+
FPP v2.x-34-geec0224e (master branch)

Falcon f16v2 -v1.11 b006

Eth0 settings
You cannot view this attachment.
Wlan0 settings
You cannot view this attachment.
F16 network settings
You cannot view this attachment.
Network DNS setting
You cannot view this attachment.
Zero Packets while file runs
You cannot view this attachment.

[Bassun]

Oh, I forgot to add the 1.31 setups
You cannot view this attachment.

[Bassun]

PFT... never mind.  Apparently my last changes got it working, I just needed to RESTART the FPP.  DOH. 

Maybe if someone else has issues my settings will help them figure the issue out.