BBB use while running P10's

[StickyWicket]

Last year I bought both a PI2 and BBB. Started running my show with PI until audio glitches appeared (using the Vast transmitter) switched to running the show all via the BBB.

This year I plan on adding P10's, my question is what, if anything, I can control with the BBB while running P10's

Specifically can I still use the BBB for audio?

I will be running about 5k pixels, can I use the E1.31 off the BBB? Would it be better to run those in a master/remote combo with the PI2?

[CaptainMurdoch]

Yes, you can use the BBB as a master and use any available channel outputs (including E1.31) while it is running P10's.

I ran a BBB master for 2015.  This BBB was connected to P10 panels and a Vast FMT-212R transmitter.  It also was master to two remote Pi FPP instances.

[EmmienLightFan]

The BBB doesn't have audio out, so you need a USB audio interface, such as the Behringer 302USB

[algerdes]

The BBB doesn't have audio out, so you need a USB audio interface, such as the Behringer 302USB

Correct me if I've been misled, but I believe that the Vast FMT-212R is a USB audio feed.