Setting up LOR to serial of F16v3 and configure in xLights

[Trioxide]

  Trying to get my LOR controller setup to run off  the serial on my F16v3 which is run off the outputs of my master which is a Kulp K16A-B.  Last year with xLights I was able to manually configure it and worked fine.  The LOR is on Universe 97 and the Falcon was 1-30.  This year with xLights managing everything I don't know how to do this.  I have the Falcon working with Universes 400-413.  If I add the LOR then xLights puts those LOR ports at the front so starting at 400:1.  And I have to have the port in LOR in order: 1,2,3, etc.  I can't skip a port.  I don't know how to change the settings on the LOR so that doesn't help.  Can someone help me get this setup?

[ybjr38@yahoo.com]

I run mine as a block attached to my F16v3 and other falcons. I have it plugged into port 2.  I have several of the lots all set to lor2 setting in various controllers and they all work ok. You can configure still using xlights through the block

[brmeadows]

Posted by ybjr38@yahoo.com
 - December 01, 2021, 03:10:51 PM

What does this mean? 


I run mine as a block attached to my F16v3 and other falcons. I have it plugged into port 2.  I have several of the lots all set to lor2 setting in various controllers and they all work ok. You can configure still using xlights through the block

[K-State Fan]

Posted by ybjr38@yahoo.com
- December 01, 2021, 03:10:51 PM

What does this mean?


I run mine as a block attached to my F16v3 and other falcons. I have it plugged into port 2.  I have several of the lots all set to lor2 setting in various controllers and they all work ok. You can configure still using xlights through the block

Did you figure out your question?

I assume he meant a block of channels set up in xLights and assigned to one of the ports on the falcon.

[brmeadows]

Posted by ybjr38@yahoo.com
- December 01, 2021, 03:10:51 PM

What does this mean?


I run mine as a block attached to my F16v3 and other falcons. I have it plugged into port 2.  I have several of the lots all set to lor2 setting in various controllers and they all work ok. You can configure still using xlights through the block

Did you figure out your question?

I assume he meant a block of channels set up in xLights and assigned to one of the ports on the falcon.

So the block of channels set in Xlights using Channel Block model in the layout tab. This is then uploaded as upload output on the controller tab to the Falcon. Then configured on the Falcon UI serial output port of choice.

[K-State Fan]

That is what I assumed he meant.  I do not use a channel bloc for my LOR controller the are just controlling a mega string tree and the star on top so they are configured as models then those are assigned to the serial port in the visualizer.  I can add a screen shot when I am home from work tonight.