Falcon Christmas

Other Controllers and Hardware => Legacy Controllers and Hardware => µ (Micro) Hardware - µSC, µAmp, Afterburner => Topic started by: MikelMD on April 01, 2018, 06:52:06 PM

Title: F16 v2 - uAmp and 12v PS
Post by: MikelMD on April 01, 2018, 06:52:06 PM
Hi All,


I have attached what I am trying to do.  I have a Falcon F16v2 that is 30' away from my 57 pixel strand that is 20' in length.  Because of the distance, I feel I need to add both a uAMP and a power injection.  However, the injection takes place at pixel one, after the uAMp, is that possible?  The cable is 18 gauge.


Thx
Title: Re: F16 v2 - uAmp and 12v PS
Post by: nmiller0113 on April 01, 2018, 08:31:50 PM
Should be just fine. I've got plenty of my runs with the exact same setup.  Honestly though, you shouldn't need to inject with that few pixels, even with that distance. Honestly, I'd even try it without the uAmp because you can get surprising distances straight from the controller.
Title: Re: F16 v2 - uAmp and 12v PS
Post by: MikelMD on April 02, 2018, 04:54:48 AM
Thank you!  I will give it a try


Sent from my iPhone using Tapatalk
Powered by SMFPacks Menu Editor Mod