News:

LATEST RELEASE:  FPP 6.3 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.3

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15697
Latest: ejrich83
New This Month: 15
New This Week: 1
New Today: 1
Stats
Total Posts: 128621
Total Topics: 15828
Most Online Today: 47
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 3
Guests: 34
Total: 37

K8-PB No network on first run

Started by blackramair, September 26, 2021, 11:21:21 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blackramair

Have a new K8-PB I just put together for my neighbor, I plug in my usb hub with ethernet from my F8-B and fire it up. The board boots and displays no network it's like the USB port is getting power or something. Did I miss a step since it has been a couple years since I last setup a new Kulp board? Thought maybe it was a power issue to I switched out the wire to 12ga from PSU to K8-PB board but that didn't change anything.

UPDATE:
I was able to isolate it to the cape. I can use a micro usb cable and boot the pocket beagle and connect to FPP.  Seems like the USB on the cape isn't getting powered up.

rharrington76

Quote from: blackramair on September 26, 2021, 11:21:21 AMHave a new K8-PB I just put together for my neighbor, I plug in my usb hub with ethernet from my F8-B and fire it up. The board boots and displays no network it's like the USB port is getting power or something. Did I miss a step since it has been a couple years since I last setup a new Kulp board? Thought maybe it was a power issue to I switched out the wire to 12ga from PSU to K8-PB board but that didn't change anything.

UPDATE:
I was able to isolate it to the cape. I can use a micro usb cable and boot the pocket beagle and connect to FPP.  Seems like the USB on the cape isn't getting powered up.
I have isolated this on two Capes this year.  Have 4 of the 40PBs.  Not sure if it is the hubs causing the component fail, but also have the F8-B and have had no issues with those.  Sure would be nice to know what is causing this failure on multiple boards and if there is a resolution.  never tethered and used the same USB hub and wifi adapter as I am using on the ones that work.  

technowolfe

I'm having the same issue with a couple of new K40D-PB's.  I believe that I have also isolated the issue to the K40D boards (not the PB).  One of my K40's will connect via eth0 as expected, but when I plug in the recommended USB wireless antenna, it knocks the entire network offline on the controller and I have to unplug the wireless and reboot.  On my second K40D, I can't get the eth0 network to register at all.  Really at a loss as to what to try next.  The USB hub, wireless antenna and network cable all perform perfectly when hooked into my spare K8-B.

@dkulp , Is there's a process for sending in my boards for further analysis and repair if necessary? 

Support FPP

+- Recent Topics

Limitations on Video file size? by Jayl
Today at 09:05:26 AM

FPP 7 Kubernetes Error by Jlwright325
March 22, 2023, 11:11:59 AM

FPP Install on Raspberry Pi Zero W by k6ccc
March 21, 2023, 05:53:50 PM

FPP install script on Ubuntu, no video by AlexanderMedia
March 21, 2023, 09:37:23 AM

DMX to pneumatic solenoid by JerryPlak
March 20, 2023, 01:03:53 PM

Libre SBC with oled by mel4853
March 19, 2023, 12:24:34 PM

F16v3 External Power Connector by darylc
March 16, 2023, 05:25:46 PM

FPP on PC HDMI Output by AlexanderMedia
March 15, 2023, 01:17:55 PM

Orange Pi One and external DS3231 RTC on rtc1 by Arti G
March 13, 2023, 09:29:28 AM

FM transmitters by Poporacer
March 12, 2023, 10:54:39 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod