Low voltage reported on V1 (6.8V) but no evidence of actual low voltage?

[summetj]

I'm seeing a V1: 6.8v (but V2 is 11.9V).  I do have two power supplies, so I pulled out the multi-meter, but both supplies are right around 11.9 volts output under load when the display is running.   [And the input ports on the F16V3 also show 11.9 volts on both the left and right sides...]  And the 1-8 port lights are just as bright as the 9-16 port lights, so no evidence that my 12v pixels are seeing a reduced voltage.

The player appears to be working just fine otherwise.   I'm suspicious that the voltage sensor itself may be off? 

Any other diagnostics I should be doing?

Thanks,
Jay

Controller Information:

Name:	F16V3	SW Version:	v2.59
Uptime:	00:09:16	Controller Time:	18:50:1912-04-22
Temp. 1:	34°C (93°F)	Temp. 2	40°C (104°F)
Voltage 1:	6.8 V	Voltage 2	12.1 V
Fan RPM:	0 RPM	Processor Temp:	59°C (138°F)

[Poporacer]

That is a bug that had been around for a while. Just ignore it

[jnealand]

I agree with Poporacer.  Known problem for a couple of years.  Stop looking at those numbers and just use your multimeter.  sigh