BBB / FPP sending data to ESP32 WLED

[srwmemphis]

I built a "Tune To Sign using a Beagle Board Black with an Octoscroller hat on it and p5 Panels. The sign works perfect. (running FPP in standalone mode)
I added an ESP32 running WLED on it to control a short string of pixels. The BBB and ESP32 connected together through a small Ethernet switch. I configured FPP to send E1.31 commands to the ESP32 running WLED to control the short string of pixels.
When I send the data from xlights to the ESP32 WLED it works perfect.
The problems start when I use xlights "FPP Connect" to send the file to the FPP and then play the file from FPP, the colors are all wrong on the string of pixels. I don't know what I am doing wrong because WLED displays correct colors manually.
Any Ideas?

[jnealand]

Sounds to me like you just need to change the color order in FPP for the pixel string.

[Poporacer]

That sounds like it might be one of two things. Either a channel mis match or a color order of the pixels. How about some screen shots of your xLights controller page, your layout page and your controller's pixel port page?

[srwmemphis]

1