News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15932
Latest: pavit66767
New This Month: 21
New This Week: 1
New Today: 0
Stats
Total Posts: 129693
Total Topics: 15996
Most Online Today: 119
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 4
Guests: 95
Total: 99

colorlight 5a-75b not working with raspberry pi4B fpp

Started by aquila2heman, May 27, 2023, 07:02:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jnealand

#15
I have some 32x32 P5 panels that I configure as though they are two 32x16 panels.  Works just fine  My panels are at least 5 years old and I am using a Pi and
one of the original Pi hats that were available back then..
Jim Nealand
Kennesaw, GA all Falcon controllers, all 12v Master Remote Multisync with Pi and BBB P10 and P5

Kensington Graves

Quote from: aquila2heman on June 01, 2023, 02:44:48 AMAnd ThisYou cannot view this attachment.
Did you use a .rcvp file supplied by your vendor?  I seem to recall that I exactly the same problem in LEDVision when using the vendor-supplied file.  The tell-tale is cabinet setting.  You'll need to mess around with the settings until you hit the right combination.

Try changing the module to 32x32 and 1/16 scan in LEDVision.  The test pattern looks like you're getting horizontal overlap, which suggests that the width setting on the panel size is incorrect.  You may have to manually adjust some other settings.  The test pattern should like like the picture I attached—no overlap at all.


You cannot view this attachment.

k6ccc

Just food for thought.  The overlap may be due to the matrix beinq quite small.  As Kensington Graves photo shows, there should be "LED1" in each corner and the middle.  Because the matrix is so small, the "LED1" in the upper left corner would overlap with the "LED1" in the upper right corner - as seen.  The "LED1" in the middle and the color circles appear to be correct.  The size of the text in comparison to the color circles appears to match the way it is on Kenington's photo.
Note, I make no claim to being a LEDVision expert.  I only used colorLight cards one year and only were able to configure them with assistance on the Zoom room.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

Kensington Graves

No, it's a configuration issue. I had the same overlap when I was assembling the big matrix for the first time.  I just don't remember what I did to fix it.  It may be the cabinet size setting.  The card may think it is running a matrix equal to the size parameters set there and keeps outputting data to fill the cabinet.  I'll pull up LEDVision when I get to the office and see if my parameters are still set.  Probably what I should have done in the first place.

Kensington Graves

Aha!  I knew it.  My modules are 16x16 1/16 scan.  The 32x16 setting is possibly what is causing the overlap.  I've posted pictures of my settings.  See if they work for you.  Changing the DCLK setting and refresh rate will change the allowable cabinet sizes.  17.9MHz and 1920 refresh were the lower limit for my matrix, but it got me to cabinet size I needed.

Support FPP

+- Recent Topics

Is the Pi 3B still supported on 7.1? by jnealand
Today at 06:49:50 PM

Can’t see F16V3 through FPP by Laser Falcon
Today at 03:26:16 PM

FPP Ignore GPIO triggers outside show hours by JonD
Today at 10:46:31 AM

Text on Matrix by JonD
Today at 10:41:03 AM

All new stuff by i1uhrace
September 26, 2023, 09:57:48 PM

Unable to change color curves by cmndr brain
September 26, 2023, 05:44:08 PM

Matrix audio issue by MikeKrebs
September 25, 2023, 09:11:08 PM

Music and models out of sync by MikeKrebs
September 25, 2023, 09:08:25 PM

Anybody know what this is or who made it? by JonD
September 25, 2023, 05:23:21 AM

Differential expansion question by cjrobin27
September 24, 2023, 08:07:02 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod