Progress at Last

[ThreeSizes]

 

I've finally made some progress getting things together. Finished up my show control box which has my FPP (Pi3) with HiFiBerry, Behringer Mixer, EDM FM Transmitter, and a small MeanWell 5V/12V Dual Voltage Power Supply. I'm not happy with the fit in the CG-1500 and will be switching it out into a Bud NBF-32022 w/NBX-10988-PL Enclosure after the end of the year. I've already switched over to the Bud NBF-32026 w/NBX-32926-PL Enclosures for my controllers and power supplies (I'm still building them so details on those coming later).

[DMJPixel]

Nice!


Sent from my iPhone using Tapatalk

[ThreeSizes]

More progress tonight, the F16V2R is online. Like I mentioned before I went with the Bud NBF-32026 w/NBX-32926-PL Enclosures over the CG-1500. I have two boxes one dedicated to the F16V2-R and Expansion Board, PIXEL-1, and one dedicated to the power supplies, POWER-1. The power box has three MeanWell SE-350-12 and one MeanWell SE-350-24 (20W Floods). Its interconnected to the pixel box using Weipu 4-conductor 12-gauge connectors for Main V1, Expansion V1, Main V2, and Expansion V2. There's a 2-core white pigtail which brings in Temp2 from the F16V2-R into the power box placed on the left side near the middle. The power box is feed from a watertight L5-20 plug. On the PIXEL-1 box, there's two watertight RJ45 on the left side (future proofing for the F16V3). I haven't brought in the pigtails yet, I'll populate them as I build out the elements.

[ThreeSizes]

- Show Controller: Check
- Pixel Controller: Check
- Power Supply: Check
- Flood Lights: Check (thanks to a special E.L.F.)
- Mega Tree: Check
- SnowFlake: Check
- Quick & Dirty Sequence: Check


- Three Days to Spare: Check