News:

LATEST RELEASE:  FPP 6.3 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.3

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15736
Latest: richardrons076
New This Month: 3
New This Week: 3
New Today: 1
Stats
Total Posts: 129006
Total Topics: 15889
Most Online Today: 122
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 0
Guests: 118
Total: 118

Think I found a bug/corner case...please help

Started by cooper5389, December 01, 2022, 10:24:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jnealand

I believe 8gb is the minimum.  But you can hardly find those anymore.  I used to buy 16 but the price between 16 and 32 is really small so everything I use is 32 now.  I have 12 remotes in my show plus some spares.  Even the full price of a 32gb is just rounding error in comparison to the cost of your show.  Don't be cheap.
Jim Nealand
Kennesaw, GA all Falcon controllers, all 12v Master Remote Multisync with Pi and BBB P10 and P5

k6ccc

Quote from: cooper5389 on December 02, 2022, 09:10:55 AMLooks like 3.5GB

Or the Root Dir 100% full is currently 3.5GB i should say


No wonder you're having problems!
Get a larger capacity card and do a clean image onto it.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

k6ccc

I just looked at the current manual.  It says minimum required is 4GB with 16 GB minimum recommended.
With only a 4 GB card, loading anything else (such as a fppos upgrade file) would be really pushing it.
I'm running 32 in mine and all I'm doing is driving a matrix panel via E1.31 - so no sequence files, media files, etc.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

breese

Either that is a very small card or it has failed.
If you pull it out, what size is it?
I am betting it failed.

Poporacer

To remove the file, you need to specify the location if you are not in the same folder and you have to use sudo. It looks like either your card is too small, or the card has not been expanded.
Go to the ssh shell again and try

sudo rm media/upload BBB-6.2.fppos

and see if that frees up enough space. If not try rm all of the log files.
If to err is human, I am more human than most people.

cooper5389

Not sure what I changed... but now both my beaglebones are not showing up on my network.  Oh good grief:/ 

I assume the DNS or network settings (perhaps IP addresses that were static have now been dumped).   


On both my personal Mac or PC I get nothing when I connect via USB. I need to connect to be able to flash it.     

k6ccc

Quote from: cooper5389 on December 02, 2022, 12:13:48 PMI need to connect to be able to flash it. 

No, you don't.  Re-image a uSD card that is at least 8GB (more is better) on your computer, insert into BBB, power up.

Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

Kensington Graves

Did you flash FPP to the eMMC in an earlier life?  If you are upgrading that sort of system with fppos, you would keep overwriting the OS location unless you manually changed the boot order to go to the SD card.  I noticed that the initial setup page did not have the message about  unused space and expanding the filesystem, and I ran into the insufficient storage problem all the time when upgrading systems that had FPP on the eMMC.

Support FPP

+- Recent Topics

Raspberry PI 4 b fan by JonB256
June 07, 2023, 09:30:09 AM

Advatek Vortex 48 channel DC controller by k6ccc
June 06, 2023, 09:31:41 AM

RS485 CAN HAT for DMX by MikeKrebs
June 05, 2023, 09:18:04 PM

colorlight 5a-75b not working with raspberry pi4B fpp by Kensington Graves
June 05, 2023, 10:09:36 AM

Multi Channel Audio by dkulp
June 05, 2023, 09:30:24 AM

Wifi help by dkulp
June 04, 2023, 12:24:56 PM

MMAL error 2 "ENOSPC" by MikeKrebs
June 03, 2023, 09:34:36 PM

Dmx by MikeKrebs
June 03, 2023, 08:53:35 PM

F48V4-NS at 40 fps using all 48 pixel output ports? by MikeKrebs
June 02, 2023, 09:36:11 PM

EEEPROM Files by shanebou24
June 01, 2023, 01:27:06 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod