News:

LATEST RELEASE:  FPP 8.1 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/8.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 16584
Latest: bt129
New This Month: 22
New This Week: 13
New Today: 2
Stats
Total Posts: 133553
Total Topics: 16622
Most Online Today: 46
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 0
Guests: 32
Total: 32

New K16s

Started by tetleytealeaf, September 08, 2024, 03:34:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tetleytealeaf

I just picked up a new K16, and I had a few questions:

1). It says there is an expansion port in addition to the 4 RJ45 diff receiver ports.  Are there any updates to what expansion boards this can be used for?  Falcon?  Can that expansion board be far away?

2). It says the FPP manual has not been updated to account for the RJ45 DMX ports that were brought back.    Does that information exist somewhere, or is connecting it to Renard trivial?  I.e. just plug it in and set it to Renard in FPP?

3). Can I set one port to DMX and the other to Renard on the new K16?  That didn't work on the K32.

4). Why 4 power banks for just 16 channels?   Does this mean I can mix 5v and 12v?  Or is it just to mitigate the outage if one efuse trips?

Thanks a lot




dkulp

Quote from: tetleytealeaf on September 08, 2024, 03:34:29 PM1). It says there is an expansion port in addition to the 4 RJ45 diff receiver ports.  Are there any updates to what expansion boards this can be used for?  Falcon?  Can that expansion board be far away?

It's a Falcon v4 expansion board.   The ribbon cable is only good for about 30 inches or so.  Definitely not very far.

Quote2). It says the FPP manual has not been updated to account for the RJ45 DMX ports that were brought back.    Does that information exist somewhere, or is connecting it to Renard trivial?  I.e. just plug it in and set it to Renard in FPP?

It uses the DMX pinout.   You would need a custom cable for Renard.   I'm sure those details are on one of the forums someplace.

Quote3). Can I set one port to DMX and the other to Renard on the new K16?  That didn't work on the K32.

Yes.  That worked on the K32 as well.

Quote4). Why 4 power banks for just 16 channels?  Does this mean I can mix 5v and 12v?  Or is it just to mitigate the outage if one efuse trips?

The new eFuses are rated for 6A (instead of 5).  Putting 48A (8*6A)through a single screw terminal is WAY WAY over spec and would have melted it down.  Breaking them into smaller banks was needed.  Yes, you can mix 5V and 12V and 24V. Each of the four banks can be a different voltage.





Daniel Kulp - https://kulplights.com

tetleytealeaf

Quote from: dkulp on September 08, 2024, 06:07:48 PM
Quote from: tetleytealeaf on September 08, 2024, 03:34:29 PMQuote
Quote3). Can I set one port to DMX and the other to Renard on the new K16?  That didn't work on the K32.

Yes.  That worked on the K32 as well.

Quote4). Why 4 power banks for just 16 channels?  Does this mean I can mix 5v and 12v?  Or is it just to mitigate the outage if one efuse trips?

The new eFuses are rated for 6A (instead of 5).  Putting 48A (8*6A)through a single screw terminal is WAY WAY over spec and would have melted it down.  Breaking them into smaller banks was needed.  Yes, you can mix 5V and 12V and 24V. Each of the four banks can be a different voltage.

Re: mixing DMX and Renard, maybe the FPP update changed something, but last year when I changed ttys2 to Renard, it changed ttys1 to Renard, and when I tried to set ttys1 back to DMX, it changed ttys2 back to DMX. 

RE: 4 banks.  Makes sense.

tetleytealeaf

Thanks for those ingenious snap-on phoenix connector jigs, too, by the way.  And making the video.   One big time-saver you did not mention (aka take credit for) in the video is how the jig tells you the polarity.   I spend forever double-checking which side red and ground go on.  

dkulp

Quote from: tetleytealeaf on September 14, 2024, 03:55:31 PMThanks for those ingenious snap-on phoenix connector jigs, too, by the way.  And making the video.  One big time-saver you did not mention (aka take credit for) in the video is how the jig tells you the polarity.  I spend forever double-checking which side red and ground go on. 

I've sold several sets of them, but haven't heard from anyone if they really thought it was a big time saver or if they were easy enough to use or anything.   Thanks for that feedback.

The jig definitely took a bunch of iterations to get to a point I was happy with it.   The double sided jig is nice in that it holds 8, but due to the coloring, it requires a color change for most layers to print which make it take a long time and wastes a bunch of filament.  Still trying to adjust that a bit.  
Daniel Kulp - https://kulplights.com

tetleytealeaf

I don't care about the double, other than now I have two of them (that's nice...).  Maybe the people who assemble enclosures and sell them could really benefit,   But I  probably represent the majority, and 4 is plenty.  Usually I do only one or two phoenix at at a time, because I'm switching around channels.  I.e. it's not a mass assembly situation--just me messing around with my show.  

Support FPP

+- Recent Topics

Pixels flickering when playing directly from XLights by JonD
Today at 09:11:21 AM

problems with a matrix setup by cowboyjeeper
Today at 07:37:55 AM

K40 Network port stopped working by Joepat
October 10, 2024, 08:13:00 PM

Composite analog video output on Pi 4 / FPP 8.1 by scsi
October 10, 2024, 06:23:12 PM

PiCap V2 & DMX by breese
October 10, 2024, 04:27:56 AM

co-universes.json does not exist keeps showin up in log by eatumup
October 09, 2024, 10:25:25 PM

Install New FPP by PittFan
October 09, 2024, 08:05:55 PM

Xlights FPP Connect Issues by Poporacer
October 09, 2024, 07:43:34 PM

FPP->HinksPix by MikeKrebs
October 08, 2024, 09:12:13 PM

Video uploads not working. by bciarcia
October 08, 2024, 08:32:23 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod