F48 v1 & F16v5

[munu]

I have an old F48 v1 and want to expand it. Is it possible to combine an F48 v1 with an F16v5 or possibly older (used) F16? The main goal is that I can synchronize both the F48 and F16v5 in xLights without much difficulty. I think it should be straight forward but wanted to make sure before spending more money. 

[MikeKrebs]

If you are sending data to the controllers, it syncs from the player. If the controller you are considering has a remote mode (sequences downloaded to controller), they will sync with your player via the sync packets.

[Mark_M]

Easily possible to use new & old controllers together.
There's people out there still running j1sys controllers with their new ones. And there's big drive-through shows running a 100+ Falcon's off one network!

Just add the F16v5 into xLights as another controller. Then add your props with the visualiser to each controller individually.
Data from your show player (e.g. xSchedule or FPP) will be sent to both controller simultaneously.