LYNX ZEUS 16/8/scc

[edwinpeek]

I am trying to use the LYNX controllers I built years ago.  I have read many pages and it seems like no one is using them.  I have so many that I would like to try to use them, but the files do not appear to be available any longer there are really not any good how-to do this either.  I understand the DLA is not really Falcon stuff, but if any one can help me with files needed etc thanks.  I have 4 pixeldongles 1-32, 33-64, 65-96 and 1 spare.  more than 10 each zues 16 and 8 boards build, and at least 32 scc built.  also have smart and dump scc hubs built. 

[jnealand]

I have a number of manuals and firmware.  You will need to be specific on what versions of hardware you have.  for example, there are 4 versions of SSC.  I never got my Zeus products working before I switched to other vendors and there are two versions of Zeus firmware, one by RJ and one by David Pitts.  There are a number of former Lynx users in this group so don't give up hope,  But almost universally we would all tell you that the products you can buy today are so superior to the old Lynx product that you should just buy some new stuff and get your blink on.

[deanathpc]

I second Jim's response to you.  I have 10 Lynx boards around along with some other things by RJ and while I do use a few lynx boards for some old props, I have been working on converting everything over to pixels.  I too might have manuals for some things along with firmware but I'd have to search for the stuff.  I probably have replacement parts for my Lynx controllers also.  Again, I'd have to search for those too.

[edwinpeek]

the Zeus 16 and 8 are Pixel controlers, all my stuff currently have RJ version of firmware.  I do have falcon controller as well, but as I understand most of what I have read in the forums if I updated my ver 3 controller they do not output pixel data an longer. So I would have to check them to see what ver they are.  I do have 4 pixel dongles that do output pixelnet.  I have ver 1, 2 and ver 4 of the SCC.  I have all the picket stuff and can flash any files needed.

[jnealand]

as I understand most of what I have read in the forums if I updated my ver 3 controller they do not output pixel data an longer.

Ver 3 what???
You asked for manual and firmware but you still have not stated what specifically you need.  Just because you have all the stuff you listed does not mean to me that you need anything for those pieces of hardware.  I'm not interested in sending things not needed and we can not read your mind.

[edwinpeek]

its ok, thanks for the responses, I was really just trying to figure out how to use them,  Thanks for you time.  I do not know what to use them for if I can't understand how to use them.   So for now I guess I will try and figure something out.