Smart Receiver connectivity issue after running FPP Connect with latest version.

[Reys Dad]

I have a Falcon V5 and I recently upgraded from FPP 9.2 to 9.3 and Xlights 2025.9 to 2025.12
Now whenever I do a FPP upload (or could also be when I do the controller upload) the smart receivers seem to have an issue receiving the data signal afterwards. The four lights on the smart receivers cycle back and forth like those old Cylon Raiders from the original Battlestar Galactica. Anyway, if I push the test button on each of the smart receivers the 4 lights go solid and the lights connected to the smart receiver start working again. Not sure what's causing this but at least there is a workaround in case someone else has the same problem. FYI, I didn't notice this issue with the earlier release during Halloween.

[Reys Dad]

Update, I had to power cycle my Falcon F16V5 tonight and the issue with the remotes happened again. So perhaps not related to xlights upload. Maybe something to do with when the Falcon goes through some kind of reset. I'll try reaching out to David P in a few days.