Lights stay on after sequence or test on BBB

[nmiller0113]

I'm running F32-B's for all of my controllers and have not seen any of these issues....nor have I enabled any of the additional options like "Blank between sequences" or "Always transmit channel data" as the manual states that's primarily for older controllers.  But the OP said they were seeing this on a F8-Bv1 iirc?

[twooly]

Don't think they can or will backup to 3.4 and reissue - will be in 3.5

I can issue a 3.4.1 if needed....   I likely wouldn't do full 3.4.1 images so it would be an install 3.4 and hit the manual update, but if the changes are minor that should go fairly quick.

Can others actually confirm if master fixes the issue?

Yep I can confirm.  Turned off the always send data on the two remotes, only thing selected is the blank between sequences.  Turns on/off with display testing for both and all lights turn off from display testing and sequences.

Yes a 3.4.1 would be awesome, thanks for all that you do!

[Sawdust]

Updated master on master and all remotes....then tested

Deselected ALL "Always transmit channel data" AND "Blank between sequences:" on Master and all Remotes...lights out at end of sequence, and lights out at test off. Works perfectly for me.

Thanks a bunch Dan

[Sawdust]

Loaded 3.4.1 on Master and all remotes.  Tested...all is still working perfectly.

Thanks again Dam.