Abnormal Condition Error

[tristan]

Keep getting the error message shown in image (have also put text below whilst waiting for image to be approved.
I don't know why it's occurring or how to fix. Any help greatly appreciated.

"Abnormal Conditions - May Cause Poor Performance
BBB48String: Could not read pin configuration for HE123
Could not initialize output type BBB$*String. Check logs for details."

Where do i find logs?

[CeP]

There is a link to the 'FPP Manual' under the Help tab in FPP.
Start there first, it has a bunch of useful information.

[JonD]

FPP\Content Setup\File Manger\Logs Tab. 

[Poporacer]

Keep getting the error message shown in image

There are a few things that can cause this. 
Uploading an incorrect configuration in xLights to your controller
Installing an incorrect eeprom file to your controller
Getting a controller with an incorrectly programmed eeprom
and a few other less common issues.
You didn't tell us what controller, or what version of FPP
Give us that information and maybe a screenshot of your controller configuration in xLights?
There is a way to reset that as well depending on what version of FPP you are running.

[tristan]

Hi Im running a Hanson Electronics HE123 board.
https://www.hansonelectronics.com.au/product/he123mk2/

I had mentioned running FPP Version 6.3

Is there a way to completely wipe the BBB and start from scratch?

I had tried to reimage via SD and the SD is still in there but it looks like its booting from the internal memory.

You cannot view this attachment. You cannot view this attachment. You cannot view this attachment.[/attach]

[Poporacer]

I had mentioned running FPP Version 6.3

I didn't see that (I still don't see it LOL) And only one of your attachments came through. In order to post attachments, you have to go to the Reply, don't use the Quick Reply.

Is there a way to completely wipe the BBB and start from scratch?

Yes, remove the card and re-image it. But there is a way to reset all of the output configurations since that is what you messed up.

I had tried to reimage via SD and the SD is still in there but it looks like its booting from the internal memory.

You tried to re-image the card with it in the BeagleBone? That isn't the way to do it!

Hi Im running a Hanson Electronics HE123 board.

If that is the controller you are using, why are you telling xLights that you are using a different controller? Like I mentioned, uploading the wrong controller configuration will cause those exact errors! The website you posted has the controller configurations you are supposed to use...here they are:
You cannot view this attachment.
I would suggest going into FPP Settings and on the UI Tab change the user level to advanced, then go to the system tab and all the way at the bottom select the Reset Configuration and select only the Channel output option.
Then set up xLights correctly for the controller you have and then upload the configuration. That should get you close.