News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15654
Latest: Druha
New This Month: 4
New This Week: 5
New Today: 1
Stats
Total Posts: 128403
Total Topics: 15788
Most Online Today: 38
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 2
Guests: 24
Total: 26

Standalone Mode - limitations?

Started by boknows, November 30, 2022, 07:19:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

boknows

F48 FW 2.52

Have a 10 panel matrix (33px24p, with a 32p strand around the matrix itself - 824 total ).  Each matrix has it's own receiver set up as follows:

Port 1 - 288 pixels
Port 2 - 288 pixels
Port 3 - 216 pixels
Port 4 - 32 pixels
Total - 824 pixels

I am currently running a show using a Raspberry Pi and everything works as expected. 

However, I want to use the F48 in "standalone" mode and remove the Pi from the scenario.

I saved the sequence as a FSEQ1 file and copied them to a SD Card.  Set the playlist and scheduler up on the F48.  Went to play the show and not all of my prop lights up.  Appears that only 5-7 of my panels work. 

As stated earlier, the show plays fine when using the Pi and FSEQ2 files.

Are there limitations on the F48 in standalone mode?

JonD

#1
FW 2.52 is pretty old.  I would certain upgrade it to 2.59.  Make sure you follow the directions.  Backup the config, reset the controller, update the bootloader, then update the firmware.   There are limits using an SD card, but I have never used it that way and do not recall the particulars. 

boknows

Think I may have found the culprit.  I just read that the F48 only supports the following in standalone mode:

Maximum Universes - 48
Maximum channels - 24576

Whereas the F48v4 supports many more.

Maybe someone knows something that I don't or have not found yet?  Here's to hoping!!

darylc


darylc

Most people would strongly recommend you use the pi rather than the F48 in standalone mode.

Support FPP

+- Recent Topics

Huidu Controllers LED matrix by CaptainMurdoch
Today at 10:18:47 AM

help getting started, next step? by jnealand
Today at 08:26:29 AM

FPP6.2 universes by darylc
February 03, 2023, 08:48:57 PM

F16v4 Ports vs Universe Configuration Question by k6ccc
February 03, 2023, 09:32:48 AM

Need Expert Advise on F16v4 Ports vs Universe Configuration by Kairus
February 03, 2023, 09:32:33 AM

Set Time/Date by darylc
February 02, 2023, 06:09:40 PM

We moved and are and selling everything (in Boise, ID) by ybjr38@yahoo.com
February 02, 2023, 02:14:59 PM

K8-PB No network on first run by rharrington76
February 02, 2023, 01:39:47 PM

Help How I use Orange Pi with FPP by tbone321
February 01, 2023, 02:41:58 PM

No network by Steve_63
January 31, 2023, 08:17:21 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod