News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15307
Latest: snoopin99
New This Month: 10
New This Week: 8
New Today: 2
Stats
Total Posts: 125231
Total Topics: 15264
Most Online Today: 55
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 4
Guests: 44
Total: 48

10/20w Flood Power Injection

Started by ControlsEE, July 17, 2021, 08:55:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ControlsEE

Planning out some of the things for the roller coaster project and we are using a number of 10/20w RGB floods. I know the rule of thumb for pixels, every 50 for 5v, 100 for 12v, but are the floods any different because of their higher current draw? I don't mind power injecting, I just want to plan the wiring accordingly.

pixelpuppy

#1
Quote from: ControlsEE on July 17, 2021, 08:55:47 PMare the floods any different because of their higher current draw?
Absolutely.  Power is measured in Watts.  More wattage means more power.  You are not going to be able to power 100x 10w floods on a single 5A pixel port that normally can power 100x 12v pixels.

I don't know if I've seen a rule-of-thumb for floods, but 5A@12v=60W max per pixel port. So I'm guessing maybe 5-6 10w floods max on a single pixel port.

Not only that, but for the most port, the higher-wattage floods also need higher voltage.  There are exceptions, but generally speaking, only the 10W floods operate at 12v.  Typically, 20w floods need 24v power supply and 30w floods need 36v power supply, so anything over 10W usually requires its own separate power supply anyway.
-Mark

ControlsEE

Quote from: pixelpuppy on July 18, 2021, 05:52:51 AM
Quote from: ControlsEE on July 17, 2021, 08:55:47 PMare the floods any different because of their higher current draw?
Absolutely.  Power is measured in Watts.  More wattage means more power.  You are not going to be able to power 100x 10w floods on a single 5A pixel port that normally can power 100x 12v pixels.

I don't know if I've seen a rule-of-thumb for floods, but 5A@12v=60W max per pixel port. So I'm guessing maybe 5-6 10w floods max on a single pixel port.

Not only that, but for the most port, the higher-wattage floods also need higher voltage.  There are exceptions, but generally speaking, only the 10W floods operate at 12v.  Typically, 20w floods need 24v power supply and 30w floods need 36v power supply, so anything over 10W usually requires its own separate power supply anyway.
I figured I would have to power them off of a seperate fuse, only connecting data to the pixel port, but should I plan on power injecting at the end, or every x amount of floods? I'm curious what the voltage drop on these is like compared to standard bullet pixels.

pixelpuppy

Quote from: ControlsEE on July 18, 2021, 06:11:04 AMI'm curious what the voltage drop on these is like compared to standard bullet pixels.
Voltage drop is a function of current (and resistance).  So, yes, higher current floods are going to have more voltage drop than lower current bullet pixels.  I think you should plan on power injection for floods if you're going to have more than just a few
-Mark

Poporacer

Quote from: ControlsEE on July 18, 2021, 06:11:04 AMonly connecting data to the pixel port,
You will need to connect the ground to the pixel port as well. The data line needs the same reference point as the data line. You can combine the ground (v-) from different power sources.
If to err is human, I am more human than most people.

Ebuechner

I have a very long string of floods which all have different current and voltage requirements so my solution was to send them a higher voltage and then put a regulator in each individual flood.
I have 10 Watt 20 watt and 50 watt and I send 36 volts to everything.

tbone321

Also keep in mind that the need for power injection is due to the thin wire between the nodes, not the nodes themselves.  Since AFAIK, floods do not come in strings and you will need to make your own wiring harness anyway, if you use 14 or 12 gauge wire for the power and ground, you may not need to do any power injection at all.

Support FPP

+- Recent Topics

Written documentation for Differential Receivers v2.01 by JonD
Today at 05:23:49 AM

Falcon 4 String Smart Differential Receiver not working as expected by bloojoop
Today at 01:37:51 AM

Unable to reconnect to BBB after network config by bloojoop
Today at 01:27:56 AM

Trigger media or playlist from incoming artnet/sACN by bloojoop
Today at 01:19:41 AM

No Power to BeagleBone from K8-B by mixmstr
October 06, 2022, 11:46:20 PM

MultiSync copying of Show Files not working in FPP 6.1.1 by Sawdust
October 06, 2022, 11:16:21 PM

New K4-PB wifi problems by darylc
October 06, 2022, 06:42:34 PM

Set Time/Date by Viper16
October 06, 2022, 06:33:35 PM

Pi Hat EEPROM by tfmacz
October 06, 2022, 04:03:29 PM

Sensor does not appear in status bar by JonD
October 06, 2022, 02:58:15 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod