News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 16480
Latest: tcooper
New This Month: 12
New This Week: 1
New Today: 1
Stats
Total Posts: 132742
Total Topics: 16479
Most Online Today: 109
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 0
Guests: 77
Total: 77

K8-PB No network on first run

Started by blackramair, September 26, 2021, 11:21:21 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blackramair

Have a new K8-PB I just put together for my neighbor, I plug in my usb hub with ethernet from my F8-B and fire it up. The board boots and displays no network it's like the USB port is getting power or something. Did I miss a step since it has been a couple years since I last setup a new Kulp board? Thought maybe it was a power issue to I switched out the wire to 12ga from PSU to K8-PB board but that didn't change anything.

UPDATE:
I was able to isolate it to the cape. I can use a micro usb cable and boot the pocket beagle and connect to FPP.  Seems like the USB on the cape isn't getting powered up.

rharrington76

Quote from: blackramair on September 26, 2021, 11:21:21 AMHave a new K8-PB I just put together for my neighbor, I plug in my usb hub with ethernet from my F8-B and fire it up. The board boots and displays no network it's like the USB port is getting power or something. Did I miss a step since it has been a couple years since I last setup a new Kulp board? Thought maybe it was a power issue to I switched out the wire to 12ga from PSU to K8-PB board but that didn't change anything.

UPDATE:
I was able to isolate it to the cape. I can use a micro usb cable and boot the pocket beagle and connect to FPP.  Seems like the USB on the cape isn't getting powered up.
I have isolated this on two Capes this year.  Have 4 of the 40PBs.  Not sure if it is the hubs causing the component fail, but also have the F8-B and have had no issues with those.  Sure would be nice to know what is causing this failure on multiple boards and if there is a resolution.  never tethered and used the same USB hub and wifi adapter as I am using on the ones that work.  

technowolfe

I'm having the same issue with a couple of new K40D-PB's.  I believe that I have also isolated the issue to the K40D boards (not the PB).  One of my K40's will connect via eth0 as expected, but when I plug in the recommended USB wireless antenna, it knocks the entire network offline on the controller and I have to unplug the wireless and reboot.  On my second K40D, I can't get the eth0 network to register at all.  Really at a loss as to what to try next.  The USB hub, wireless antenna and network cable all perform perfectly when hooked into my spare K8-B.

@dkulp , Is there's a process for sending in my boards for further analysis and repair if necessary? 

Support FPP

+- Recent Topics

do I need license for my picap New? by jnealand
Today at 12:24:51 PM

UDP error by Kev7274
Today at 03:21:00 AM

Audio Issue with Pi Zero 2 W by robbiet
July 14, 2024, 12:07:12 PM

USB (and other) issues on Pi Zero 2w by zaicik
July 14, 2024, 04:20:33 AM

Multiple text effects cause re-render by dkulp
July 13, 2024, 08:44:07 AM

FPP led Panel Troubleshooting. by Poporacer
July 12, 2024, 09:29:56 AM

output controller by JonD
July 12, 2024, 09:29:07 AM

Looking for SRx2 V5... by darylc
July 11, 2024, 05:54:34 PM

FPP 8.0 by colonelcline
July 11, 2024, 04:05:15 PM

SMPTE timecode by k6ccc
July 11, 2024, 10:36:03 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod