News:

LATEST RELEASE:  FPP 6.3 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.3

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15733
Latest: aquila2heman
New This Month: 0
New This Week: 0
New Today: 0
Stats
Total Posts: 129006
Total Topics: 15889
Most Online Today: 126
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 2
Guests: 116
Total: 118

F16v3 Pixel Controller, 1 exspanion board and 3 smart differential receivers

Started by XmasElf, March 03, 2023, 04:36:42 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

XmasElf

I have F16V3 with a expansion board and 3 smart differential Receivers and with nothing on, the lights on the smart differential receiver with 50 nodes are on. I have only 1 smart receiver connected as A and terminated. You can see it in the pictures.

I did the light test on the smart receiver and everything works great, but when I do any test from the falcon nothing happens on the receiver. I put another set of lights on port 1 of the F16V3 and it works great but still nothing out to the receiver.

Lights on receiver remain on.

Anybody know why the lights on the receiver would be on? Tested all 3 smart receivers and they are the same.
v2.59

You cannot view this attachment. You cannot view this attachment. You cannot view this attachment.  

darylc


XmasElf

No I just let xlights do it.

As soon as I plug the cat6 cable in the controller the lights come on.

tbone321

That is what they are supposed to do.  The lights IFAIK, only show that you have a valid connection between the F16 and the receiver.  Your current configuration has ports 30, 31, and 32 all in the same channel range as port 29.  You have defined port 29 to start at channel 1 for 50 nodes.  That would put the end channel at 150 as shown in the configuration screen.  You then defined port 30 to start at channel 43 which is within the channel range of port 29 and the same is true for ports 31 and 32 as well.  As for the falcon test not working, you need to check the definition of the connector on the F16 that you are using and make sure that it is defined properly for output of those ports on that connection.  If not, then while the lights on the receiver will still light up, there will not be any channel data going there.

k6ccc

Quote from: tbone321 on March 03, 2023, 06:06:18 PMThat is what they are supposed to do.  The lights IFAIK, only show that you have a valid connection between the F16 and the receiver. 
I think there may be a failure to communicate.  I think XmasElf is talking about the 50 pixels on the first string, not the status LEDs on the receiver board.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

darylc

xlights will not do all of the configuration you need, you need to add manual config to the serial outputs page to tell it you want to run pixel data out the 4 dmx ports

XmasElf

Thanks darylc........I read the manual and must have missed that part. I knew that the top RJ45 on the controller was for the smart receivers but had no idea that the serial ports outputs need to be configured. I also noticed that the lights on the smart receiver started to light upon enabling the output setting. (they were all lite before) So I assume that if I only want to used 1 port on each of the boards I would only have to configure the serial output #1 in the setting.

My smart receiver boards are v1.03 and I just used the v1.00 to 1.02 manual. I still do have a grasp on dmx 1,2,and 3, like if i want to had 2 dmx rotating spot lights on 2 and 3 dmx. (plan for  the future)

Thanks Everyone

Support FPP

+- Recent Topics

Raspberry PI 4 b fan by JonB256
June 07, 2023, 09:30:09 AM

Advatek Vortex 48 channel DC controller by k6ccc
June 06, 2023, 09:31:41 AM

RS485 CAN HAT for DMX by MikeKrebs
June 05, 2023, 09:18:04 PM

colorlight 5a-75b not working with raspberry pi4B fpp by Kensington Graves
June 05, 2023, 10:09:36 AM

Multi Channel Audio by dkulp
June 05, 2023, 09:30:24 AM

Wifi help by dkulp
June 04, 2023, 12:24:56 PM

MMAL error 2 "ENOSPC" by MikeKrebs
June 03, 2023, 09:34:36 PM

Dmx by MikeKrebs
June 03, 2023, 08:53:35 PM

F48V4-NS at 40 fps using all 48 pixel output ports? by MikeKrebs
June 02, 2023, 09:36:11 PM

EEEPROM Files by shanebou24
June 01, 2023, 01:27:06 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod