FV2 Blue - Web Interface doe not populate String Data

[edmon]

The web interface does not show any of the string configurations.  See attached screen shots.

Setup - Wireless access on Remote PI connected to board, access through proxy.

[darylc]

it is likely that the f16v2 does not support being accessed via the fpp proxy

[Poporacer]

Like Daryl said, in order to use the proxy, you have to have newer firmware. For the V3s it was 2.55 I think. I don't know if there is a firmware update for the V2s

[lorajoslyn]

Hmmm... I have an F16V2 (blue) that I was able to pull in from Xlights and I'm using the same firmware as you have. Could your visualization not be configured with this controller?

. 

[Poporacer]

I have an F16V2 (blue) that I was able to pull in from Xlights

But how? How about posting the Header of your controller page where it is showing the IP address.

[lorajoslyn]

Here ya go. 

I didn't do anything differently from the other boards here, except with the update of the firmware. 

[bloojoop]

@lorajoslyn , you don't appear to be accessing this controller via a FPP proxy but rather accessing it directly.  Yes it will work directly, web interface will not likely work when accessed via FPP proxy. 

[edmon]

Thanks for the info and responses everyone.  Confirmed, The V2 does not operate through proxy.