Does the Falcon f16v4 support TM1814 RGBW LEDs?

[ric878]

Does the Falcon f16v4 support TM1814 RGBW LEDs? I have a separate but similar question for the f16v3 in it's respect forum.

[JonD]

Docs do not list them as supported, but they are not always kept current.  Might reach out to Falcon Support if someone does not respond otherwise.

https://docs.google.com/spreadsheets/d/1LTQzdvSYMrRGI62KTGdh5EmUhVB9uZZMQ4iwWtK7yYk/edit?gid=2005112714#gid=2005112714

You cannot view this attachment.

[btm231]

My experience with TM1814 pucks... https://falconchristmas.com/forum/index.php?topic=16566.0

So my v4 has been collecting dust for a year until I have another use for it. $240 paperweight until then, lol

[darylc]

@btm231 did you ever contact support@pixelcontroller.com ?

[btm231]

I had moved onto a different controller for that project for the sake of time, but might revisit it and do just that soon

[ric878]

I had moved onto a different controller for that project for the sake of time, but might revisit it and do just that soon

What controller did you end up using?

[btm231]

I had moved onto a different controller for that project for the sake of time, but might revisit it and do just that soon

What controller did you end up using?

Those are currently being controlled by a Digiquad ESP controller

[btm231]

Just an update:

I can't truly re-test this at scale again without swapping controllers, but I updated the F16 to build 32 (previously on build 30) and have been running tests on a run of 40 pixels and have not experienced any of that awful flickering thus far. 

So given this result, I may just swap controllers and have the F16 run everything in place of the Dig Quad and report back. Probably won't get around to that for a week or two though. This will certainly make my life easier if it actually works properly now, lol. But might miss the WLED fall-back

[btm231]

Just an update:

I can't truly re-test this at scale again without swapping controllers, but I updated the F16 to build 32 (previously on build 30) and have been running tests on a run of 40 pixels and have not experienced any of that awful flickering thus far.

So given this result, I may just swap controllers and have the F16 run everything in place of the Dig Quad and report back. Probably won't get around to that for a week or two though. This will certainly make my life easier if it actually works properly now, lol. But might miss the WLED fall-back

Aaaand never mind... still have the flicker issue. At my wits end. See what support comes up with