Projector Control Plugin

[rmonty]

Would it be possible to get the following commands added for a Domino Sim2 Projector?

     Array("NAME" => "Domino SIM2",
             
                "ON" => "\xBE\xEF\x02\x06\x00\x6B\xE6\x52\x01\x00\x00\x00\x00",
                "OFF" => "\xBE\xEF\x02\x06\x00\x51\xE4\x48\x01\x00\x00\x00\x00",
               
                "BAUD_RATE" => "19200",
                "CHAR_BITS" => "8",
                "STOP_BITS" => "1",
                "PARITY" => "none"
),


I can provide the whole manual if needed, but these are really the only commands needed.

Thanks,
Ryan

[Splork]

Good evening,

I am trying to turn on and off the Optoma ZH406ST projector using PJLINK. I believe I have everything setup properly and have gone in to putty, changed the permissions of the executables to be completely open and tried to run the on and off scripts. I can't seem to get either to work.

I am attaching logs(link) of the plugin and failures in hopes that someone may have an idea of what is going on?


Falcon Projector Plugin

[Wurm64]

Would it be possible to add the following NEC NP-PA550W Projector.

https://assets.sharpnecdisplays.us/documents/colorbrochures/np-pa600x-550w-500u-500x_specbrochure.pdf

[bigredfa]

Optima EH412ST

https://content.etilize.com/User-Manual/1060239084.pdf

[Mharnish]

Hey Ben,
Can you add the NEC PE456USL projector.  I have tried all of the listed NEC projectors and no luck.  I will be using it over Ethernet and not Serial Cable
https://www.sharp-nec-displays.com/dl/en/pj_manual/pe506ul.html

Function Code Data 
POWER ON 02H 00H 00H 00H 00H 02H 
POWER OFF 02H 01H 00H 00H 00H 03H 
INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H 
INPUT SELECT HDMI1 02H 03H 00H 00H 02H 01H 1AH 22H 
INPUT SELECT HDMI2 02H 03H 00H 00H 02H 01H 1BH 23H 
INPUT SELECT USB-A 02H 03H 00H 00H 02H 01H 1FH 27H 
INPUT SELECT LAN 02H 03H 00H 00H 02H 01H 20H 28H 
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H 
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H 
SOUND MUTE ON 02H 12H 00H 00H 00H 14H 
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H

Thanks,
Mark

[radiomarsh]

New install of FPP 8.3 with the OS update. When I SSH following the instructions i get a "can't find CPAN" error. Is there a fix for this?

Thanks,

Marshall

[MikeKrebs]

Is your FPP on the internet?