Server migration complete, Welcome to version 2.1.1



Welcome, Guest.
Please login or register.
Forgot your password?

+-Site Stats

Total Members: 16427
Latest: digilabpg
New This Month: 21
New This Week: 2
New Today: 0
Total Posts: 132343
Total Topics: 16406
Most Online Today: 126
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 0
Guests: 63
Total: 63

F8-B+ locking up BBB

Started by Babybear, December 03, 2023, 02:51:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


F8-B+ is locking up my BBB from starting. I have a F8-B+ never used. Loaded up a BBB. All set. Once I install the F8-B+ the BBB will not do anything. Im running each on separate power. Jumper to power the BBB from the F8-B+ is removed. Power setting on the F8-B+ is set to 5 volts. Next step? 
Rochester, New York


Are you powering the cape or the BBB or both?  Do you have the jumper set correctly on the cape to indicate whether you are powering the BBB via the cape or not.


I am powering each separate   Jumper 12  (jumper to power BBB) is not on. Power for the BBB is going in the barrel. I have tried both 12 volt and 5 volt to power the F8-B+  The jumper J1 has been set proper each time. This unit is 2 to 3 years old. Never been used or even set up.  The only thing that does happen when power is applied to the board the 8 LEDs do light up saying the fuses have power
Rochester, New York


You have not mentioned an SD card or version of FPP.  Do we assume that you have those installed as well?

Kinda sounds like a system with no SD card installed.
Jim Nealand
Kennesaw, GA all Falcon controllers, all 12v Master Remote Multisync with Pi and BBB P10 and P5


The SD card is installed  I did flash to the BBB   Verson 7.0 FPP  I did also try an Octoplus on the BBB with no issue
Rochester, New York


If to err is human, I am more human than most people.


Download the image off Github
Flash to card using Balena Etcher
after starting BBB used FPP move it over to the BBB memory 
Then used FPP to expand the card memory. 

I dont just up grade I always start fresh 
also there is or was no new image for 7.3 
Rochester, New York


Quote from: Babybear on December 04, 2023, 05:17:19 PMThe only thing that does happen when power is applied to the board the 8 LEDs do light up saying the fuses have power
How about the 4 small blue LEDs on the BeagleBone itself? If they are not continually flashing, then it is not booting. There is also a Blue power led, is that on?

If the blue LEDS are not flashing, then check the pins inside the SD card reader are not bent.
If to err is human, I am more human than most people.


With out the F8-B+ installed the BBB starts up just fine. All the menus come up fine  Blue power light is on and the 4 LEDs are flashing at the proper times. once the F8-B+ is on the only thing I get is the power light.   So yes when F8-B+ is installed the BBB will not boot. 
Rochester, New York


Well JimmyG, I would say you tried all you could and is determined the F8-B+ is no good. Time to look for a new board.
I have three of the F8-B+ V3.0 boards that have worked flawlessly for years now.
Maybe look at replacing it with a K8 which now has a time clock and temperature sensors.
Chuck P
Still Learning...💡

Support FPP

+- Recent Topics

configuration by Poporacer
Today at 07:34:10 AM

FP 7.5 Crash after approximately 440 loads of the same Playlist, memory full by CaptainMurdoch
April 23, 2024, 03:48:12 PM

F32v5 Release Date by JonD
April 23, 2024, 09:14:57 AM

MQTT with Home Assistant, model control only lights up some pixels. by CaptainMurdoch
April 22, 2024, 01:30:45 PM

Looking for a way to "fast forward" a video playlist by Jayl
April 18, 2024, 03:20:31 PM

P9-28 and P9-29 not work by windaube
April 15, 2024, 03:40:34 PM

Resetting or Removing FPP Password (with Windows) by greenreader9
April 14, 2024, 06:21:46 PM

Enclosure for Video Projectors by Scott
April 14, 2024, 12:00:50 PM

Born in the USA by Xmas!
April 13, 2024, 03:25:16 PM

1200w HP Power Supplies by MikeKrebs
April 12, 2024, 08:53:19 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod