FPP 9.2 new setup configuration issues

[wbartles]

What am I missing?  Please Help!!  3 new SD cards install using Raspberry Pi imager on Pi 4B no wlan0 only ETH0  showing???

[nikom74]

Not a reply, but a similar situation. Using a Kulp32A-B with BBB. TP-Link USB Wireless has been flawless for a year. I tried upgrading from 8.4 to 9.2 last night and after restart, the LCD said "No Network". I brought the Controller into the house, flashed the SD card with a 9.3 image from the git site. I can power on the BBB, USB tether to it, set almost everything, except the wLan0 connection doesn't show up as an option. 

[Poporacer]

TP-Link USB Wireless has been flawless for a year.

Linux (the underlying operating system for FPP) dropped support for older wi-fi adapters, so many adapters that worked in the past, might not work now. 

[Poporacer]

3 new SD cards install using Raspberry Pi imager on Pi 4B no wlan0 only ETH0  showing???

That is odd, I have 5 Raspberry Pi devices of various versions (3, 4, and 5) all connecting via Wi-Fi. Maybe a bad Pi?
What does the troubleshooting commands for Wireless show?

[nikom74]

So after experimenting, I swapped a TP-Link AC1300 for the AC600 and the Kulp 32 now finds the hardware and I have a connection. I put the TP-Link AC600 out on the Kulp8 and it no longer found a network. So ordered another AC1300 from Amazon.