News:

LATEST RELEASE:  FPP 7.5 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/7.5

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 16476
Latest: jbhubert
New This Month: 8
New This Week: 5
New Today: 2
Stats
Total Posts: 132724
Total Topics: 16475
Most Online Today: 114
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 2
Guests: 68
Total: 70

Differential Board & Wire Colore

Started by munu, February 02, 2022, 12:00:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

munu

I have a bunch of differential boards for the F48 controller. I also purchase xConnect cables from Ray which have 3 conductors, one yellow/green, one blue and one brown. I assume yellow/green goes to G. But how about blue and brown? Which one goes to D and which one to V?

pixelpuppy

Quote from: munu on February 02, 2022, 12:00:00 AMI also purchase xConnect cables from Ray which have 3 conductors, one yellow/green, one blue and one brown. I assume yellow/green goes to G. But how about blue and brown? Which one goes to D and which one to V?
You should always verify with a multimeter.... but usually, Brown is V+, Blue is V-, and Yellow is Data.

-Mark

munu

I will check with a multimeter but this is very helpful.

TWW

Very useful chart.

But, as munu said I would always check with a multimeter that the plugs have been wired correctly.

I got a whole batch early this year where they had swapped the + and - v leads in manufacturing.

I spent ages replacing pixels/checking leads on a new prop until I realised the pins had been swapped over on the pigtails themselves.

I've taken to plugging new ones in to leads I know are correct and making sure the colours match up using the continuity setting on the meter. Everyone says I am getting paranoid. :D

towerclimber87

I am wondering if someone can help me. 
I am using felcon player and wled. i have them setup via ethernet talking to each other on its own network 192.168.3.100 for the PI, wled is 192.168.3.10. my home network is 192.168.1.X. 
I am able to get the setup to work but I cannot reach Wled when its setup this way. This is only important so i can change my pixel counts when i move around my props.

tbone321

What are you trying to reach your wled with to change its configuration?  192.168.3.X and 192.168.1.X are two different networks so anything on the 192.168.1.X will NOT be able to directly communicate with anything having an IP address of 192.168.3.X.  You can either set the wled and the PI to something on the 192.168.1.X home network or set the IP address of whatever device you are trying to configure the wled to an address on the 192.168.3.X network.  You could also set up a router and a static route on the device you want to connect to the wled but that seems to be way too much effort for what you want to do.

Support FPP

+- Recent Topics

FPP led Panel Troubleshooting. by jbhubert
Today at 05:49:15 AM

Looking for SRx2 V5... by darylc
July 11, 2024, 05:54:34 PM

FPP 8.0 by colonelcline
July 11, 2024, 04:05:15 PM

SMPTE timecode by k6ccc
July 11, 2024, 10:36:03 AM

Matrix panels go full while on every restart by k6ccc
July 11, 2024, 08:17:58 AM

output controller by MikeKrebs
July 10, 2024, 10:31:28 PM

Multiple text effects cause re-render by breese
July 09, 2024, 06:19:48 AM

Cannot change serial settings for Renard by jeff.ott
July 08, 2024, 09:11:47 PM

7.5 wlan ARP issue? by peterjp
July 05, 2024, 11:44:49 PM

FPPv7.5 octoscoller error by dkulp
July 05, 2024, 10:44:41 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod