Smart Receiver Daisy Chain Configuration

[Blruff6]

On the F16V4 board, how do I daisy chain smart receivers (v2.01)  from the RCVR1 port?  I have three smart receivers and am having problems getting them to work. I have tried different configurations and can only get the first board in the chain to work properly. Any help would be appreciated. 

[Skymaster]

Did you disable the terminators on the first and second board?

Rule of thumb -
  two 8p8c cables plugged into the receiver - disable terminators.
  one 8p8c cable plugged into the receiver - enable terminators.

[JonD]

Example.. Chaining three smart receivers 2.01 (Blue)  A,B,C. 

Set the first Smart receiver to setting A  Termination OFF
Set the second Smart Receiver to setting B Termination OFF
Set the third Smart Receiver to Setting C Termination ON  (only terminate the last device in the chain!!!!)

Make sure all the network cables are good.

In Falcon controller settings under ports, make sure you hit the plus button to see the Port A,B,C settings as well.

The F16V4 manual has some good pictures.
https://docs.google.com/document/d/1449zGk1HEiQjcu6e98ebWnFBMFKUiXaFzis9QGAnfsk/edit  Page 230?