LATEST RELEASE:  FPP 6.3 - Download from here -



Welcome, Guest.
Please login or register.
Forgot your password?

+-Site Stats

Total Members: 15658
Latest: CharlieOhio
New This Month: 8
New This Week: 2
New Today: 2
Total Posts: 128426
Total Topics: 15790
Most Online Today: 30
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 0
Guests: 10
Total: 10

F16V2 LOR S5 setup issues

Started by Shooky79, October 14, 2021, 07:51:42 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


I have the v2 connected to a switch then to the modem. I can search for the IP and use the Falcon config page, even test the lights. But in LOR S5 with a built prop there is no talky talky. What settings could I have messed up?  Iv tried DMX channels and LOR channels no go. The pixels I m using are 5v 2811s. I have used alpha pix for over ten years then decided to try falcon, so I m not completely retarded... Still alittle behind the curve with S5 thou.


The F16V2 manual link!

I don't have a F16V2 board, but if it is the same as the F16v3 and F16v4 (which from the manual appears to be) you would need to do the following using Universe 122 as an example.

You will need to define the light in your LOR "Preview Design" 
You will need to open the LOR "Network Preferences" in your light controls or tray menu and configure Universe 122 to E1.31 and specify the Falcon controller IP address.
You will need to define Universe 122 on the E131 Setup page on the Falcon Controller
You will need to assign Universe 122 to a port on the Falcon "Output Settings\Port. page.

You should set the Falcon to use a manual/static IP address.  Otherwise a power outage could cause the Falcon to be assigned a different IP address which would break things.  If you don't have a lot of lights you could set the "Network Preferences" to use "Multicast" which would then send the information to everything on the network.  At that point it would not matter what IP the Falcon grabbed, but I would not recommend the "Multicast" setting in most cases.


Support FPP

+- Recent Topics

Unable to update RPi 5.5 to latest version by JonB256
February 05, 2023, 07:23:16 PM

help getting started, next step? by rayster
February 05, 2023, 04:24:09 PM

Warning/Error: Network incomplete frames hit 250. by darylc
February 05, 2023, 04:06:58 PM

F48V4-NS at 40 fps using all 48 pixel output ports? by darylc
February 05, 2023, 03:59:37 PM

F48v4NS - Pi or No Pi? by joeyblasko
February 05, 2023, 09:15:33 AM

Huidu Controllers LED matrix by CaptainMurdoch
February 04, 2023, 10:18:47 AM

FPP6.2 universes by darylc
February 03, 2023, 08:48:57 PM

F16v4 Ports vs Universe Configuration Question by k6ccc
February 03, 2023, 09:32:48 AM

Need Expert Advise on F16v4 Ports vs Universe Configuration by Kairus
February 03, 2023, 09:32:33 AM

Set Time/Date by darylc
February 02, 2023, 06:09:40 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod