K8-PI eFuse control errors

[EricD]

I just installed FPP 8.1 on a Pi 3B with a K8-Pi hat and the UI is showing me the following errors and the eFuses are stuck on with no apparent control.

Abnormal Conditions - May cause poor performance or other issues
 Could not find pin pca9675b-0 to enable output Port 1
 Could not find pin pca9675b-13 to handle fuse for output Port 1
 Could not find pin pca9675b-1 to enable output Port 2
 Could not find pin pca9675b-14 to handle fuse for output Port 2
 Could not find pin pca9675b-2 to enable output Port 3
 Could not find pin pca9675b-15 to handle fuse for output Port 3
 Could not find pin pca9675b-3 to enable output Port 4
 Could not find pin pca9675b-12 to handle fuse for output Port 4
 Could not find pin pca9675b-4 to enable output Port 5
 Could not find pin pca9675b-11 to handle fuse for output Port 5
 Could not find pin pca9675b-5 to enable output Port 6
 Could not find pin pca9675b-10 to handle fuse for output Port 6
 Could not find pin pca9675b-6 to enable output Port 7
 Could not find pin pca9675b-9 to handle fuse for output Port 7
 Could not find pin pca9675b-7 to enable output Port 8
 Could not find pin pca9675b-8 to handle fuse for output Port 8

[EricD]

Everything else on the Health Check returns green.

Cape info page content:

Name:	K8-Pi
Version:	2.0
Serial Number:	D991231211818
Designer:	Daniel Kulp
Licensed Outputs:	Unlimited ('dk' key)
Output Driver:	DPIPixels

About page:

FPP Version:	8.1
Platform:	Raspberry Pi (Pi 3 Model B)
FPP OS Build:	v2024-10
OS Version:	Raspbian GNU/Linux 12 (bookworm)
Hardware Serial Number:	00000000d42d94de
Kernel Version:	6.6.51-v7+
System Boot Time:	2024-10-11 09:27:41
fppd Uptime:	07:14
Local Git Version:	e444786 ChangeLog
Remote Git Version:	e444786

[darylc]

I think the pca9675 errors will be fixed in 8.2 which will be released in a few days

[EricD]

Thanks, should I report this on github or is there a known bug for it already?

[EricD]

Swapped the exact same microsd card & hat onto a Pi4 and the errors went away