Falcon Christmas

Falcon Christmas => F4V2 4-Port E131 controller => Topic started by: caniac on January 06, 2019, 07:05:01 AM

Title: Config F4V3
Post by: caniac on January 06, 2019, 07:05:01 AM
needing to know if I need the F4V2 Differential Expansion board in place before configuring the F4V3 or can I do that ahead of time and how?
Title: Re: Config F4V3
Post by: pixelpuppy on January 06, 2019, 07:22:12 AM
You can configure it without the expansion attached.   All the intelligence and configuration is done is on the main board.
Title: Re: Config F4V3
Post by: caniac on January 06, 2019, 07:42:42 PM
How?  Don't see anything.
Title: Re: Config F4V3
Post by: K-State Fan on January 07, 2019, 05:35:19 AM

Set the port mode to what you are going to be using

Title: Re: Config F4V3
Post by: caniac on January 07, 2019, 06:05:34 AM
thanks and done.