Falcon Christmas

Falcon Christmas => Falcon F-16 Pixelnet Controller => Topic started by: mtb101 on December 20, 2015, 01:42:37 PM

Title: No output in Run mode from xlights [SOLVED]
Post by: mtb101 on December 20, 2015, 01:42:37 PM
The f16 is programmed to run 16 strings, at 50 rgb leds per string. The lights flashed when programming and the test mode they worked fine. When I open Xlights; I can not get the strings to do anything and the on board led for data also doesn't flash. Im running universe 1 and 2 from the usb pixlenet dongle.
Title: Re: No output in Run mode from xlights
Post by: David Pitts on December 20, 2015, 01:53:46 PM
The USB Pixelnet Dongle can only output one universe. Please only program F16 for one universe not two.
Title: Re: No output in Run mode from xlights
Post by: MrChristmas2000 on December 20, 2015, 03:01:00 PM
I wonder if that is an F16 v1 or F16 v2?

Could make a world of difference in operation.
Title: Re: No output in Run mode from xlights
Post by: mtb101 on December 20, 2015, 04:59:17 PM
I wonder if that is an F16 v1 or F16 v2?

Could make a world of difference in operation.
It is a Version 1
The USB Pixelnet Dongle can only output one universe. Please only program F16 for one universe not two.
How would I go about doing so?
Title: Re: No output in Run mode from xlights [SOLVED]
Post by: David Pitts on December 20, 2015, 05:28:54 PM
With the Falcon Controller Software.