Falcon Christmas

Falcon Christmas => Falcon PiCap => Topic started by: Casper on December 13, 2018, 03:18:45 PM

Title: Vixen setup / PICAP help please
Post by: Casper on December 13, 2018, 03:18:45 PM

I have read a few pages and I'm all confused.

I have set up an outline on my house with 2 sets of Pixel strings. One with 431 Pixels (1293 Channels) on pin 18 and 493 Pixels (1479 Channels) on Pin 19. This is the part I'm not sure if I got right?


I set up Vixen with 2 Streaming ACN, 1 has 1293 patched and the other 1479 patched to it. I'm attaching a picture. My output on my house is not even close to what I made in Vixen. So i'm thinking I have this config wrong?


(https://drive.google.com/file/d/19LYeXsuzWOnUB2-gQPpX1XifyAM4cKqv/view?usp=sharing)


https://drive.google.com/file/d/19LYeXsuzWOnUB2-gQPpX1XifyAM4cKqv/view?usp=sharing (https://drive.google.com/file/d/19LYeXsuzWOnUB2-gQPpX1XifyAM4cKqv/view?usp=sharing)


PIc at the link above
Title: Re: Vixen setup / PICAP help please
Post by: Casper on December 13, 2018, 03:23:20 PM
I forgot to mention that I'm running the sequences from FPP and I have a Arduino running 16 AC lights but it's runing OK.
Title: Re: Vixen setup / PICAP help please
Post by: Casper on December 13, 2018, 03:41:04 PM
https://youtu.be/JSPTySLHsrI (https://youtu.be/JSPTySLHsrI)

When he sings only the right of the house should be blue and when she sings the left should be red.
Title: Re: Vixen setup / PICAP help please
Post by: Casper on December 13, 2018, 07:49:42 PM
You can delete this thread, issue was with FPP settings. There is a reason they added the F2 button function and put it on the page :)