Falcon Christmas

Falcon Christmas => Falcon NEO (PI Matrix Board) => Topic started by: Livermore-Dad on December 14, 2015, 02:53:37 PM

Title: boscoyostudio p10 panels parts don't totally fit the aliexpress panels I bought.
Post by: Livermore-Dad on December 14, 2015, 02:53:37 PM
But what I did was tap the untapped holes with a 1/4-20 tap through each and bought 1/4-20-1/2 screws. This allows me to get the rigidity that the other panels receive that have all their holes tapped.

I don't see how I can mount the power plate without modification, but not too worried about that yet. The screws are much larger obviously and the screw heads are not flush, but it does the job..