F48v4 Pinout

[KE4NYV]

Just ordered my F48 tonight.  Opted for the RJ45 version.  In preparation for wiring, I was looking for a manual, but I couldn't find anything.  Is there a super secret document portal anywhere?

I'm mostly interested in the WS2812 port pinouts, so I can start figuring out how I want to wire it to bulkhead connectors on the NEMA box I'm thinking about using.

Excited to get started.  My wife and I have the soldering irons warmed up!

Thanks,
Jason

[darylc]

The pixel port outputs are the same as all the other falcon products, so you can check the f16v3 manual for instance.

[KE4NYV]

The pixel port outputs are the same as all the other falcon products, so you can check the f16v3 manual for instance.

Thanks!  I'll check that out.

Jason

[KE4NYV]

The pixel port outputs are the same as all the other falcon products, so you can check the f16v3 manual for instance.

Thanks!  I'll check that out.

Well, I feel pretty dumb.  I just determined that I should have ordered the F16V3 and emailed them asking to make a change to the order.

I mistakenly thought the RJ45 ports were broken out to two channels per physical RJ45 port ie. Pins 1-4 and Pins 5-8 for each channel.  I realize now they are meant for a connection to differential receiver boards.

Hopefully they can change it before it ships.  I have to rethink my plan.

Jason

[darylc]

The pixel port outputs are the same as all the other falcon products, so you can check the f16v3 manual for instance.

Thanks!  I'll check that out.

Well, I feel pretty dumb.  I just determined that I should have ordered the F16V3 and emailed them asking to make a change to the order.

I mistakenly thought the RJ45 ports were broken out to two channels per physical RJ45 port ie. Pins 1-4 and Pins 5-8 for each channel.  I realize now they are meant for a connection to differential receiver boards.

Hopefully they can change it before it ships.  I have to rethink my plan.

Jason

I'm not sure the F16v3 is available anymore, try asking for a change to the F16v4