Cape K128D-B No longer works

[Babybear]

I have 2 K128D-B and loaded FPP 9.2 on both. No longer to get any output on them. Rolled back to FPP 8.0 and they both work just fine. 

[rdzxtomx@yahoo.com]

What was the previous version you were running before loading 9.2?
I just installed a brand new K128D-B and it came with 9.2.

If I configure 200 pixels on the first 8 ports, I can test those ports and the pixels turn on.
If I add 200 pixels to an addtional 4 ports (12 ports total), testing fails.

After seeing your post, I am trying 8.5.

[rdzxtomx@yahoo.com]

After downgrading to version 8.5, everything is working perfectly.

[Babybear]

Sorry it took so long to get back Had to finish up the local stock racing season.  I think it was 8. 2 or 3 as it was last september of 2024. Only thing now no responce with any buttions on the boards. Ill try jumping up to 8.5 

[dkulp]

I think I figured this out and pushed a fix.  

[Babybear]

Thank you for your help they are now working fine  9.2

[Babybear]

Started to put-up lights on the house. These boards in test mode I have one that the Right half put outs singles and the other the left half. So the garage board ports 1-8 work but 9-16 don't, next row down 17-24 work then 25-32 don't all the way down have the same pattern   My basement board is the complete opposite.  It almost seems like whatever side had lights hooked first. Went back to FPP 8.4 and all is well