Can’t find Falcon F16v3 or F48 (original) through IP addresses.

[Todd]

Both my Falcon controllers F16v3 and F48 aren't found through IP addresses. They are still running 2.0 firmware. I've reset both. Tried and tested the cables. The Ethernet port lights are flashing green. I'm going through a switch. Tried Google, Bing and Firefox. Can't find them. Running a pi with the newest FPP. My Kulp controllers are there by IP. The pi is there by Ip. But no Falcons. Could 2.0 firmware be the issue? Any other suggestions would be greatly appreciated


Sent from my iPhone using Tapatalk

[MikeKrebs]

Are the displays on the Falcons working? And the "correct" IP is showing? When you reset, did you change the network or did you let it dhcp?

Did you see bug fix for the F16v3 at v2.51? Looks like it might be worth an upgrade.
https://docs.google.com/document/d/1xcEewFtAJ8EzxstdH9H6LRlWAlYiTKY2z8ymwAUN_-Q/edit?tab=t.0

[Todd]

Displays are fine. IP addresses are the same as they were for years. I've tried DHCP and static. Nothing finds them. I've been using them for years with no issues until this year. The only thing different is I'm using a Windows 11 computer instead of my old one which was windows 10.


Sent from my iPhone using Tapatalk

[allknowing2012]

Displays are fine. IP addresses are the same as they were for years. I've tried DHCP and static. Nothing finds them. I've been using them for years with no issues until this year. The only thing different is I'm using a Windows 11 computer instead of my old one which was windows 10.


Sent from my iPhone using Tapatalk

Your home internet changed? ie. your ip vlan (first 3 digits) doesnt match the falcon? -- assuming you are not using a show network w a pi.

[Todd]

No sir. Nothing has that I'm aware of. The falcons are 192.168.0.11 and 18. The pi is 192.168.1.184 the K32a-b is 192.168.1.41 if that helps.

[Todd]

Displays are fine. IP addresses are the same as they were for years. I've tried DHCP and static. Nothing finds them. I've been using them for years with no issues until this year. The only thing different is I'm using a Windows 11 computer instead of my old one which was windows 10.


Sent from my iPhone using Tapatalk

Your home internet changed? ie. your ip vlan (first 3 digits) doesnt match the falcon? -- assuming you are not using a show network w a pi.

Yes I am using a pi w/FPP to run the show


Sent from my iPhone using Tapatalk

[jnealand]

Looks like you are running on two different networks.  192.168.0.x  and 192.168.1.x  Why do you not have all the controllers on the same network?

[Todd]

Thanks Jim. I completely overlooked that. Changed it and it solved my problem.


Sent from my iPhone using Tapatalk

[jnealand]

It is often the simplest things that stump up.  Been down that road a lot.  sigh